✅ 1-Year Parts Warranty | 🔧 30-Day Labor Warranty
👑 100% Satisfaction Guaranteed | 📋 Written Estimate Always
🔧
A&Y Appliances
Usually replies in minutes
Glassell Park, California
Appliance Repair Glassell Park
A 33-year-old Sub-Zero we kept running, a year-old fridge we said wasn’t worth fixing, and more jobs from ZIP 90065. The $85 diagnostic comes off your repair.
Built in 1992, still worth fixing. Bought last year, not worth it.
Age alone doesn’t decide whether a repair makes sense. A built-in Sub-Zero from 1992 got two major repairs and a check-up from us in 2025. A compact fridge about a year old got a diagnosis and an honest “replace it.” Both come straight from our job records, with customers’ names and street addresses kept off this page.
Sub-Zero 501F freezer and 501R refrigerator, plates dated April 1992
Repaired
August 7–17, 2025 · the freezer won’t freeze
The booking said the Sub-Zero wasn’t freezing. It’s a pair of built-in columns, and both rating plates carry the April 1992 date and list Refrigerant 12. Photos from that job show our gauges on the sealed system and our refrigerant equipment on the floor in front of the unit. The job record doesn’t list the parts used on this first job, so we won’t guess at them here.
Closed and paid August 17: about $2,135
August 17–30, 2025 · the refrigerator column
On August 17, the same day the freezer job was closed out, a second job began on the 501R refrigerator column. We replaced its compressor and evaporator coil.
Finished August 30: about $2,010
September 23, 2025 · condensation and a warm panel
The customer called about condensation and a part of the cabinet that was warming up. Our technician tested the freezer and found it operating as designed. The warm area sits over refrigerant tubing routed behind the panels, so some heat there is normal, and the line temperatures read within the normal range. The notes also record that this unit had already had a complete sealed-system repair.
The condenser fan motor was tested as well. It was working, so the technician didn’t recommend replacing it. A quote for a new motor was requested anyway; the technician wrote one up and noted that the fan blade for this unit is no longer available. That visit ended without a repair.
August 2025: our refrigerant equipment, hoses and gauges on the floor in front of the Sub-Zero.The 501F freezer’s plate in the door frame, listing Refrigerant 12. Serial blurred.The 501R refrigerator’s plate, also APR92 and Refrigerant 12. Serial blurred.
Vissani MDTF10WHES4 compact top-freezer, owned a little over a year
Replace
June 29, 2026
The customer booked online: the fridge had suddenly stopped keeping food cold, the freezer had stopped too, and it still hummed while plugged in. They’d had it a little over a year and it was the first time it had happened.
Our technician diagnosed a failed compressor. On a fridge this size, a compressor job (part plus labor) would likely run past the price of a comparable new one, so the technician recommended replacing the fridge instead of repairing it.
Bill: the $85 diagnostic
The back of the Vissani: model label, GMCC compressor, filter drier and drain tray.
More from the 90065 job file
A freezer, a dryer, two gas ranges.
Newest first. Each dollar figure comes off that job’s invoice, rounded to a multiple of five.
July 22, 2026
LG LMXS28626D French-door refrigerator Bill: about $835
The freezer stopped cooling on an LG built in 2017
The rating plate dates this LG to November 2017. Our technician’s work list: recover the refrigerant, purge and clean the system with nitrogen, fit an access valve, replace the filter drier, braze joints where needed, pull a vacuum to clear moisture and non-condensables, recharge with the correct amount of refrigerant, and update the control board’s firmware.
The notes add that the compressor would be replaced under warranty if testing confirmed it had failed. The record doesn’t show that it was, so we’re not claiming a new compressor here.
Rating plate: LMXS28626D, R134a, 5.11 oz charge, production date 2017.11. Serial blurred.Our manifold at 54.2 and 55.0 psig, with the charging scale showing 5.50 oz.Nine minutes later, with the manifold switched to R134A, the two gauges read 6.1 and 103.3 psig.
November 5, 2025
GE GHDP490GF0WW gas dryer Bill: about $320
A noisy dryer with worn bearings
The booking just said “Dryer.” The technician found worn drum bearings behind the noise and the drop in performance. With new bearings in, the dryer was tested afterwards for smooth, quiet running.
The label inside the door opening: GHDP490GF0WW, made in Canada, set for natural gas. Serial blurred.
October 19–23, 2024
Samsung NX60A6711SS gas range Bill: about $425
A rumble that only started above 350°F
In the customer’s words, the stove made a rumbling noise once the oven passed 350 degrees, and it sounded like something going on with the motor. Our technician traced it to the motor as well. The part was ordered from Marcone on October 21 and fitted when it arrived. The closing note: working properly, no noise. The note doesn’t say which motor it was.
The five-burner Samsung gas range in its kitchen alcove.Its label: NX60A6711SS/AA, manufactured April 2021, convection heater listed. Serial blurred.
October 1, 2024
Amana AGR5330BAS3 gas range Bill: about $130
The gas company flagged carbon monoxide. We cleaned it and left the gas off.
The customer had a note from the gas company about excessive carbon monoxide at the range. Under the cover our technician found white dust, a sign that chemical liquids may have been used to clean it, which could have caused the high reading. Our technician cleaned the range thoroughly and made the adjustments it needed.
For safety, we left the gas valve off. As the technician’s note puts it, the range has to be checked and reopened by a certified gas company.
The Amana range with the gas company’s tag hanging on the oven (tag blurred).The Amana label: AGR5330BAS3, natural gas, made in Mexico. Serial blurred.
Something in your 90065 kitchen sounding like one of these?
Describe the symptom; a model number read off the label speeds up the parts check.
These come from our completed jobs in ZIP 90065, compared with completed jobs across everywhere we work. Only the differences big enough to trust are listed.
28%
of 90065 jobs were dishwashers
That counts jobs where we recorded the appliance. Area-wide it’s 13%. Here dishwashers sit just behind refrigerators (32%).
Rarely
an apartment or unit number
In 90065, a unit or apartment number almost never shows up in our job addresses. Across our area it’s about one job in eight. That’s all an address tells us; we don’t read more into it.
$365
median bill, same as area-wide
Across our area the middle half of bills runs $300 to $475; in 90065 it’s a little lower, $280 to $445. Figures cover finished repairs billed above $100, with parts and labor in the total.
April 2026 · Bosch SHX78B75UC dishwasher
A Bosch that ended at the quote
Three complaints on the booking: the red indicator light at the base wasn’t coming on, dishes weren’t drying fully, and the rubber flap at the bottom wasn’t seated properly.
Our technician quoted a new heat pump to bring back the heating and drying, plus reseating and securing the lower rubber flap, about two hours of labor. That’s where the job ended: the $85 diagnostic was paid, and nothing in our records shows a repair after the quote.
The Bosch open under its granite counter, three racks.Closed again, with the toe-kick panel off and lying on the floor.
A Google review from a 90065 job
A Sunday fridge call, in the customer’s words.
Exact Google text, tied to its job in our records. The photo is from that same job.
The Frigidaire Gallery from this job.
★★★★★
“Contacted them about a refrigerator issue on a Sunday! They came out within a couple of hours and repaired it by early evening! Reasonable price and fast service! Could not be happier with this company and will now use them for maintenance moving forward!”
Jamee Z.
Frigidaire refrigerator · 90065 · January 2025
How every visit works
Same terms on every call.
Diagnostic
$85. If you go ahead with the repair, it’s credited to the bill.
Estimate
Written, and approved by you before any repair starts.
Parts and warranty
OEM parts. 1 year on parts, 30 days on labor.
Credentials
California BEAR license #49435. BBB A+. In business since 2012.
What we do
We repair; we don’t install. Commercial laundry machines are in scope; restaurant or other commercial kitchen equipment is not.
Reach us
(747) 207-2030, or book online at any hour. Office: 201 N. Brand Blvd, Suite 248, Glendale.
